Roll-Off Dumpster & Compaction Receiver Body Manufacturing: Standard and Custom Products
|
Rear Load Dumpster |
|
Roll Off Dumpster - 40 cubic yards
|
B. M. CLARK CO., INC. has become a leader in the manufacturing of Roll-off Dumpsters of all sizes and Compaction Receiver Bodies.
Custom Roll-Off Dumpsters / Compaction Receiver Manufacturing
- We fabricate a stronger and sturdier unit that will last longer than our competitors.
- Roll-off Dumpsters and Compaction Receiver Bodies are built with:
- ¼" floors
- 11 gauge sides with channel stiffeners of 11 gauge
- 3" x 5" x 3",3" x 4" x ¼" wall tubing in doors and frame rails.
- There are many options available depending on the customer's specifications. To name a few:
- 3/16" floor
- various side heights
- Handicap windows
- tops on containers and side doors.
- If our customers want their units out of 12 gauge, we will fabricate as desired.
- We believe in meeting each customer's requirements. Below are the specifications of standard units.
back to top
Standard Roll-off Dumpsters / Compaction Receiver Sizes
| CU. YARDS |
LENGTH |
WIDTH |
HEIGHT |
INTERIOR DIAMETER |
| 60 YARD |
34' |
8' |
8' |
84" |
| 50 YARD |
27' |
8' |
8' |
84" |
| 40 YARD |
22' |
8' |
8' |
84" |
| 30 YARD |
22' |
8' |
6' |
60" |
| 25 YARD |
22' |
8' |
5' |
48" |
| 20 YARD |
22' |
8' |
5' |
42" |
STANDARD SPECIFICATIONS:
- 1/4" 11 GA. FLOOR
- 11 GAUGE SIDES
- CHANNEL STIFFENERS
- 11 GAUGE, 3" x 5" x 3"
- 3" x 4" x 1/4" TUBE DOOR AND FRAME RAILS
back to top
Standard Dumpsters Sizes
| DUMPSTER SIZES |
LENGTH |
WIDTH |
HEIGHT |
BOTTOM |
| 8 YARD REAR LOAD |
121" |
63" |
60" |
76" x 63" |
| 6 YARD REAR LOAD |
121" |
63" |
46" |
76" x 63" |
| 4 YARD REAR LOAD |
121" |
63" |
46" |
58" x 63" |
| 3 YARD REAR LOAD |
73" |
63" |
52" |
36" x 63" |
| 2 YARD REAR LOAD |
60 ½" |
35" |
50" |
38" x 62" |
| 1 ½ YARD REAR LOAD |
60 ½" |
30 ½" |
46 ¼" |
30 ½" x 60 ½" | back to top | 
Printable Page
